Publication Date: 2020-10-26
Approval Date: 2020-09-23
Submission Date: 2020-08-10
Reference number of this document: OGC 20-073
Reference URL for this document: http://www.opengis.net/doc/PER/EOAppsPilot-summary
Category: OGC Public Engineering Report
Editor: Ingo Simonis
Title: OGC Earth Observation Applications Pilot: Summary Engineering Report
Copyright © 2020 Open Geospatial Consortium. To obtain additional rights of use, visit http://www.opengeospatial.org/
This document is not an OGC Standard. This document is an OGC Public Engineering Report created as a deliverable in an OGC Interoperability Initiative and is not an official position of the OGC membership. It is distributed for review and comment. It is subject to change without notice and may not be referred to as an OGC Standard. Further, any OGC Public Engineering Report should not be referenced as required or mandatory technology in procurements. However, the discussions in this document could very well lead to the definition of an OGC Standard.
Permission is hereby granted by the Open Geospatial Consortium, ("Licensor"), free of charge and subject to the terms set forth below, to any person obtaining a copy of this Intellectual Property and any associated documentation, to deal in the Intellectual Property without restriction (except as set forth below), including without limitation the rights to implement, use, copy, modify, merge, publish, distribute, and/or sublicense copies of the Intellectual Property, and to permit persons to whom the Intellectual Property is furnished to do so, provided that all copyright notices on the intellectual property are retained intact and that each person to whom the Intellectual Property is furnished agrees to the terms of this Agreement.
If you modify the Intellectual Property, all copies of the modified Intellectual Property must include, in addition to the above copyright notice, a notice that the Intellectual Property includes modifications that have not been approved or adopted by LICENSOR.
THIS LICENSE IS A COPYRIGHT LICENSE ONLY, AND DOES NOT CONVEY ANY RIGHTS UNDER ANY PATENTS THAT MAY BE IN FORCE ANYWHERE IN THE WORLD. THE INTELLECTUAL PROPERTY IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE DO NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE INTELLECTUAL PROPERTY WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE INTELLECTUAL PROPERTY WILL BE UNINTERRUPTED OR ERROR FREE. ANY USE OF THE INTELLECTUAL PROPERTY SHALL BE MADE ENTIRELY AT THE USER’S OWN RISK. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR ANY CONTRIBUTOR OF INTELLECTUAL PROPERTY RIGHTS TO THE INTELLECTUAL PROPERTY BE LIABLE FOR ANY CLAIM, OR ANY DIRECT, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM ANY ALLEGED INFRINGEMENT OR ANY LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR UNDER ANY OTHER LEGAL THEORY, ARISING OUT OF OR IN CONNECTION WITH THE IMPLEMENTATION, USE, COMMERCIALIZATION OR PERFORMANCE OF THIS INTELLECTUAL PROPERTY.
This license is effective until terminated. You may terminate it at any time by destroying the Intellectual Property together with all copies in any form. The license will also terminate if you fail to comply with any term or condition of this Agreement. Except as provided in the following sentence, no such termination of this license shall require the termination of any third party end-user sublicense to the Intellectual Property which is in force as of the date of notice of such termination. In addition, should the Intellectual Property, or the operation of the Intellectual Property, infringe, or in LICENSOR’s sole opinion be likely to infringe, any patent, copyright, trademark or other right of a third party, you agree that LICENSOR, in its sole discretion, may terminate this license without any compensation or liability to you, your licensees or any other party. You agree upon termination of any kind to destroy or cause to be destroyed the Intellectual Property together with all copies in any form, whether held by you or by any third party.
Except as contained in this notice, the name of LICENSOR or of any other holder of a copyright in all or part of the Intellectual Property shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Intellectual Property without prior written authorization of LICENSOR or such copyright holder. LICENSOR is and shall at all times be the sole entity that may authorize you or any third party to use certification marks, trademarks or other special designations to indicate compliance with any LICENSOR standards or specifications.
This Agreement is governed by the laws of the Commonwealth of Massachusetts. The application to this Agreement of the United Nations Convention on Contracts for the International Sale of Goods is hereby expressly excluded. In the event any provision of this Agreement shall be deemed unenforceable, void or invalid, such provision shall be modified so as to make it valid and enforceable, and as so modified the entire Agreement shall remain in full force and effect. No decision, action or inaction by LICENSOR shall be construed to be a waiver of any rights or remedies available to it.
None of the Intellectual Property or underlying information or technology may be downloaded or otherwise exported or reexported in violation of U.S. export laws and regulations. In addition, you are responsible for complying with any local laws in your jurisdiction which may impact your right to import, export or use the Intellectual Property, and you represent that you have complied with any regulations or registration procedures required by applicable law to make this license enforceable.
- 1. Subject
- 2. Executive Summary
- 3. Introduction
- 4. Participants
- 5. Results
- 5.1. Open Standards
- 5.2. Application Patterns
- 5.3. Application Package and CWL
- 5.4. ADES and EMS Deployment
- 5.5. High-level Architecture
- 5.6. Data Discovery
- 5.7. SpatioTemporal Asset Catalog (STAC)
- 5.8. Container Format
- 5.9. Quotation and Billing
- 5.10. Workflows
- 5.11. Graphical User Interfaces
- 5.12. Kubernetes Cluster Support
- 6. Future Work
- Appendix A: References
- Appendix B: Terms and definitions
- Appendix C: Revision History
This Engineering Report (ER) summarizes the main achievements of the OGC Innovation Program initiative Earth Observation Applications Pilot, conducted between December 2019 and July 2020.
This Engineering Report (ER) summarizes the main achievements of the OGC Innovation Program initiative OGC Earth Observation Applications Pilot, conducted between December 2019 and July 2020. The pilot explored an Earth Observation Application software architecture that was developed in OGC Testbeds 13-15. The architecture allows the deployment and execution of externally developed applications on Earth Observation (EO) data and processing platforms. The architecture is essentially based on three major components:
Execution Management Service (EMS): This component provides a RESTful interface (defined using OpenAPI) to register applications and build workflows from registered applications. The EMS selects the appropriate ADES platform to execute the processes based on the runtime input parameters (close to the data).
Application Deployment and Execution Service (ADES): This component allows deployment, discovery, and execution of applications or processing of quoting requests.
Applications are delivered in the form of Docker images along with corresponding metadata called an Application Package (AP). The application package provides all information for deployment and execution of an application.
The pilot demonstrated that the interoperability arrangements developed and documented in OGC Innovation Program initiatives Testbed 13, 14 and 15 provide a solid starting point for maturity tests within operational platforms. Additional arrangements and more detailed definitions have been developed during the pilot that now allow deployment and execution of an application on various platforms with minimal adaptions.
The pilot produced very valuable results. It confirmed the general approach to use Docker for application packaging and HTTP Web APIs or Web Services for application handling and execution. It defined application patterns based on data inputs/outputs, confirmed the role of the Common Workflow Language (CWL) for application description, execution, and workflow building; and recommends the usage of the SpatioTemporal Asset Catalog (STAC) as a data manifest for application inputs and outputs.
The Earth Observations Applications Pilot explored and evaluated the maturity of the Earth Observation Applications architecture. The architecture has been developed in various OGC Innovation Program initiatives over the last three years. This pilot now explored everything in operational environments.
All questions regarding this document should be directed to the editor or the contributors:
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The Open Geospatial Consortium shall not be held responsible for identifying any or all such patent rights.
Recipients of this document are requested to submit, with their comments, notification of any relevant patent claims or other intellectual property rights of which they may be aware that might be infringed by any implementation of the standard set forth in this document, and to provide supporting documentation.
This Engineering Report (ER) summarizes the main achievements of the OGC Innovation Program initiative Earth Observation Applications Pilot, conducted between December 2019 and July 2020. The Call for Participation was published in December 2019. The actual execution phase lasted from January to July 2020.